Driveway Sealer 311

Description

Also, please have a read of our customer reviews for this product, which you’ll find just below. If you need any more information, please feel free to contact us and we’ll get right back to you.

Features

• Wet-look sealer
• Hard wearing
• Prevents stains and marking
• Protects surfaces
• Coverage is approx. 6m² per litre – allow approx 1 x 5ltr pail per 15m² of concrete (2 coats)

Document Downloads

• Application Guide
• Product Data Sheet

Made To Last

Being UV stable, Driveway Sealer 311 won’t yellow or crack under the harsh Australian Sun, and is also well suited for use on all exposed concrete areas including paths and patios.

Re-Sealing Older Driveways?

If you’re looking to re-seal an existing driveway, remember you may need to add a little more solvent to the first coat. This will ensure the original sealer softens (re-emulsifies) and you achieve a strong bond between the old and new coatings.

Find out more information on our Solvent 399 page.

Anti-Slip Additive

If you’re sealing around wet areas, eg, a pool or spa, some sealers may become slippery when wet. You may need to add some anti-slip powder to your final coat. We can help with that too!

More information on our anti-slip powder can be found on our product page.

PLEASE NOTE

This is a solvent based sealer and therefore not compatible with water based sealers. If you are re-sealing a surface and unsure, you should test an area with our ‘399 Solvent’ prior to application.