- The Base Coatings Coloured Concrete Sealer 301 is a xylene solvent based sealer that is designed to give a high gloss wet look finish on cement surfaces. This product will not only make your concrete areas look great, they will also seal and protect the substrate from spills, stains and moisture, helping them to stay in good condition and look great for years to come. Easy to apply using either roller, brush, broom or spray.
- Concrete Sealer 310 is a hard-wearing solvent based clear sealer designed to enhance and protect a wide range of concrete surfaces. It dries to a high gloss ‘wet-look’ clear finish and provides a smooth washable surface, protecting from stains, spills and reducing the ability of moulds, algae and lichen to discolour the surface.
- Our Driveway Sealer 311 is designed to enhance the look of concrete driveways and provide a beautiful wet-look finish. This product will seal the surface of concrete to protect it from stains and moisture, helping your driveway to stay looking great for years to come.
- ON SALE
Penetrating Sealer 602 is our water based, non-film-forming sealer. It is a silane/siloxane solution designed to cure within the surface and not leave a film. This means that it won't affect the look or feel of the surface.
Penetrating Sealer 602 can be used over a wide range of porous surfaces including concrete, some stones and wood. * Not applicable to sample bottles - Exposed Aggregate Sealer 312 is a hardwearing solvent based clear sealer designed to enhance and protect exposed aggregate concrete, including high wear areas such as driveways and paths. It can be used to ‘soften’ aged exposed aggregate where the concrete is worn away exposing sharp angular stones. The sealer fills smaller voids and coats sharp edges making the aggregate 'softer’ underfoot, which is desirable around patio and pool areas where bare feet come into contact with the surface.
- Stencilled Concrete Sealer 313 is a high gloss clear sealer and surface treatment designed to enhance colour, seal and protect decorative and stencilled concrete surfaces, including high wear areas such as driveways and paths. This product dries to a high gloss ‘wet look’ clear finish and provides a smooth washable surface, protecting from stains, spills and reducing the ability of mould, algae and lichen to discolour the surface.
- Stamped Concrete Sealer 314 is a high gloss clear sealer and surface treatment designed to enhance colour, seal and protect coloured and stamped concrete surfaces, including high wear areas such as driveways and paths. This product dries to a high gloss ‘wet look’ clear finish and provides a smooth washable surface, protecting from stains, spills and reducing the ability of moulds, algae and lichen to discolour the surface.
- Clear Water Based Sealer 401 is a hardwearing, clear coating designed to protect a wide range of surfaces including masonry, concrete and internal timber. When cured it provides a smooth washable surface that will keep the surface dry and protect it from stains and spills.
- The Base Coatings Paving Paint 402 is a hard-wearing clear paint specifically formulated to protect horizontal surfaces such as garage floors, driveways, patios and balconies, paths, pavers and tiles.
- Concrete Sealer WB 403 has been formulated to replace standard, solvent based sealers for indoor use. It's Low VOC is an excellent alternative in confined areas or areas with little ventilation. It is a hard-wearing clear coating and is recommended for coloured, stamped, polished and exposed aggregate surfaces.
- Acrylic Primer 121 is a general purpose, water based primer and waterproofer designed for application over a wide range of substrates to improve adhesion of topcoats and to control absorption. Acrylic Primer 121 is suitable for use under most water based paints, waterproofing membranes and architectural coatings. It can be applied to almost any surface including masonry, concrete, FC sheet, aluminium, timber, steel, and some plastics.
- Slate Sealer 321 has been designed to enhance and protect slate and natural hard stone surfaces. When dry, Slate Sealer 321 will give a beautiful high gloss, wet look, clear finish and provide a smooth washable surface which protects from stains, spills and reduces the ability of mould, algae and lichen to discolour the surface. Keep your slate and stone looking great for many years.
